MigmaDSFB - Pedestrian

Flashing Beacon

Flashing Sign

Backlit Sign

RRFB

Workzone

Golf Course

 

 

 

                                 Specifications

     System Operation
           Flasher Diameter: 12"
         
 
LED Quantity:
138
         
 
Luminous Intensity: ≥ 4000 cd
         
 
LED Lifetime: 5.5 years
         
 
Visual Distance: ≥ 1600 ft
         
 
Operating Time: 10 rainy days after fully charged
         
 Battery Housing:
15'' H x 14’’ W x 5''
         
 Weight: 14 lb.
         
 
Enclosure Protection: IP65
             Material:
UV-stabilized polycarbonate
           Flashing Mode: Continuous or pedestrian-activated

     Solar Panel
         
 Solar Panel Power: 10 W
         
 Battery Capacity: 12 VDC & 7 aH lead-acid battery
         
 Solar Panel Size: 9' 'x 11''
 
     Detector
           Sensor: PIR motion sensor
           Sensing Range: 30 ft (sensor to pedestrian)
           Comm Distance: 1500 ft (sensor to beacon)
           Sensor Quantity: 7 sensors simultaneously
           Sensor Power: Solar panel and 18650 Li-battery

     Download
         
  Product cutsheets can be downloaded here.

 

 

Model P
 

 

 



Phone: (508) 660-0328                                            Fax: ( 508) 660-0288                                            Email: 
contact@migmasys.com
 

 
Copyright by Migma Systems, Inc. All Rights Reserved
Others

 

The continuously flashing beacons may not necessarily attract driver’s attention because they are always on and drivers get used to them already. In addition, they flash 24/7, day and night, even when there are no vehicles or pedestrians on the streets, which might also introduce the visual noises to the residents living nearby.

Migma Systems has developed an alternative product, Distributed Sensing Flashing Beacon (DSFB) Model P, where P stands for pedestrian. The sensor receiver is embedded inside the housing of flasher, drawing power from solar panel or solar battery. Using solar-powered detector, it flashes only when pedestrians who are waiting at midblock curb are detected. Otherwise, it is off! The sensor response time is about 1 second. Moreover the detector and beacon flasher can be installed on different poles or posts.

 

 

 

 

Some vehicle drivers can be easily distracted by devices such as smart phones while driving. These distractions, caused by their devices, are well documented, rising cause of pedestrian and/or vehicle accidents and sometimes fatalities. Migma Distributed Sensing Flashing Beacon can make a difference!

 

 
Model P